In order to provide you with the best advice and tricks for maintaining your washing machine’s hygiene, the team at LG has put together a cleaning guide. So, how to clean LG washing machine?

Below will give you instructions on how to clean LG top load washer and front-load washer. For more information, please keep reading.

How to Clean An LG Top Load Washer?

Here are the specific details:

Run the Tub Clean Cycle

Run your LG top-load washer on the Tub Clean cycle as your first line of defense when cleaning it. If you want the best results, use a specially designed tub cleaner, but you can also use your regular laundry detergent.

In order to clean the tub:

• Make sure the tub is empty of clothes.
• If you’re using a cleaning tablet, put it right in the washer’s drum. Put any liquid or powder detergent you’re using in the detergent dispenser.
• Select “Tub Clean” and start the cycle.
• Wait for the washer to cool off after the cycle is finished before using a clean towel to clean the inside and the area around the lid.

Clean the Tub With Bleach

Sometimes if wet clothes are left in the machine for too long or if water pools at the bottom of your washer, it can develop an unpleasant smell that persists through multiple washes. To eliminate any bacteria that could be causing an odor in this situation, you must clean the machine with bleach.

To run a bleach cycle:

• Make sure there are no clothes in the tub.
• Check to see if the detergent dispenser is totally empty. If bleach is combined with other cleaning agents, unwanted chemical interactions may take place.
• The smell of bleach can be overpowering, so open a window or make sure the space is well ventilated.
• Four cups of liquid bleach should be poured into the machine’s tub to make one quart.
• Select “Tub Clean” and start the cycle.
• To make absolutely certain that there is no bleach left in the machine that could harm your clothes after the cycle is complete, run the machine again on a rinse cycle.

You should notice that any offensive odors have vanished after following the aforementioned steps.

Clean the Detergent Dispenser

Although it is a crucial step, the detergent dispenser is frequently missed when cleaning the washing machine.

1. First, take out the detergent dispenser. Until it stops, pull the dispenser in your direction. Find the tab that is located between the bleach and softener compartments. While pressing down on the tab, remove the washer’s detergent tray.
2. After removing the dispenser tray, check the compartment to see if anything is preventing water from entering the drum.
3. The tray’s accessories should be taken apart and cleaned one at a time with warm water and a soft brush. To do this, a used toothbrush works great. Make sure to thoroughly clean the tray, including underneath it.
4. Clean the tray’s slot while it is still out.
5. Reassemble the tray, then put it back in the washer.

Clean the Inlet Filters

If you live in an area with hard water, your washer’s inlet filters may eventually clog. An error warning may appear if your washer notices that the water is not correctly entering the dispenser due to clogged filters.

Cleaning the water inlet filters will improve your washer’s efficiency and increase its lifespan. They are simple to maintain. Here is how to do it:

• Turn off your washer by pressing the POWER button, then unplug it from the power source before cleaning. Completely close both water faucets.
• The hot and cold water lines for the washer can be unscrewed. After the water is turned off, there will still be some water in the hoses. You can drain the water into a bucket that you place underneath the hoses.
• Pull the filters out of the inlet valves using needle-nose pliers or another tool with a small point for grasping.
• Put the filters in a sink that has limescale remover or white vinegar in it. The filters are delicate and should only be handled gently. Wash until all signs of buildup are eliminated in warm water.
• Clean the filters completely before reinstalling. When the filters are pressed back into place, reconnect the water lines.

Clean the Exterior

Your LG top load washer can look brand new with a little exterior cleaning. It can be cleaned with warm water and a moderately potent, nonabrasive household detergent. Any spills should be removed with a soft wet cloth.

Avoid using abrasive cleaners, methylated spirits, steel wool, solvents, and other products that are similar. Your machine’s surface could be harmed by them.

Ensure Your Washer Remains Clean

Here’s how to maintain your washer functioning flawlessly in between cleanings:

• When the washer is not in use, keep the lid open to allow it to dry completely.
• If you typically wash with cold water, run a cycle every now and then with warm or hot water. This lessens the buildup of detergent and dirt.
• Don’t put too much or too little laundry in the washer. Both too many and too few clothes in a load will leave detergent residue in the washer. Too many clothes could cause this.

Tips for Cleaning LG Front-load Washing Machine

Due to their high energy efficiency and substantial utility bill savings, front-load washing machines have grown in popularity recently.

But in order to maintain their performance, Front-Loaders too must be cleaned frequently, just like Top-Loaders.

Here are the steps you need to take to clean your LG Front-Load washing machine:

What you will need

• Vinegar
• Lemon
• A Cloth or Sponge
• Warm Water

Note: If you don’t feel comfortable with Vinegar you can either use an affresh washing machine cleaner OR other cleaners.

Unplug the Washer

Remove the appliance from the power outlet first. This crucial step will stop the washing machine from turning on while you are cleaning it.

Remove the Laundry

Next, empty the washing machine of all the dirty laundry.

Once all the laundry has been removed, open the washer door and leave it ajar so that air can circulate inside the tub.

Prepare the Cleaning Solution

1 cup vinegar, 1 tablespoon lemon juice, and 2 cups of warm water are combined to create the cleaning solution. Take a bowl and keep the cleaning solution handy.

Clean the Dispenser Drawer

The next step is to clean the dispenser drawer. Open the drawer first, and take out all of the detergent, fabric softener, and bleach containers.

The drawer needs to be cleaned with a cloth or sponge dipped in the cleaning solution after all of the containers have been removed. Post which, rinse it with clean water, and then dry it completely before replacing all the containers.

Clean the Door Seal

Cleaning the door seal is the subsequent step. The seal should first be cleaned with a cloth or sponge dipped in a warm water solution made of vinegar and lemon.

After cleaning the seal, rinse it with clean water, and then completely dry it.

Clean the Pump Filter

According to LG, the pump filter should be cleaned at least once per month and is found at the bottom of the washing machine.

To clean the filter, start by removing it from the washing machine by rotating it in an anti-clock motion.

After removing the filter, rinse it under running water to get rid of any dirt and debris.

If it is in an extremely bad state, use a cleaning solution or Vinegar to wash it.

Before reinstalling the filter in the washing machine after rinsing it, make sure it is completely dry.

Clean the Drain Hose

After that, the drain hose needs to be cleaned.

The machine’s drain hose should be disconnected.

Once you have disconnected the hose, flush it with clean water to remove any dirt or debris that might be clogging it.

Reconnect the hose to the machine after flushing it with water.

Note: If you are cleaning the drain hose after a long time then it’s highly recommended that you use a cleaning solution OR Vinegar.

Clean the Water Inlet Valve Screen

Cleaning the water inlet valve in your LG front-load washing machine is easy.

Simply locate the valve at the backside of the washer, disconnect the pipe and remove the valve screen. Next, give it a thorough washing with either water or a cleaning agent.

Make use of a toothbrush if there is stubborn debris.

To ensure that everything is operating as it should, reattach it after which you run a brief empty wash cycle.

Cleaning the Interior Tub

Cleaning the tub is the next step.

First, fill the detergent compartment with 1 cup of vinegar.

Next, clean the tub by running a regular cycle with hot water. Use 1 cup of baking soda and 2 cups of water instead of vinegar if you prefer.

Wipe the interior of the tub with a fresh cloth or sponge after the cycle has finished.

Shut the door of the washing machine and let it air dry for a while.

Clean the Exterior

When the interior has been thoroughly cleaned, it is time to move on to the exterior.

The control panel should first be dusted, and then it should be cleaned with a damp cloth or sponge.

After that, use a glass cleaner to clean the front door’s glass.

Finally, clean the washer’s exterior body with a damp cloth.

Note: It’s advisable to not use any harsh chemicals or cleaners on the exterior as they might damage the paint or plastic.

The kind of crocs you own will affect how you should wash them. Can you put crocs in the washing machine? To avoid damaging your crocs when washing them, you should first read this post.

Essential Washing Machine Cleaning Tips

• Invest in white vinegar and baking soda for your cleaning supplies

White vinegar and bicarb will become essential components of your cleaning arsenal because of the variety of uses they have for the machine, dispenser, and drum. Both products can also help to get rid of mold and bad odors in your machine.

• Use washing up liquid or dishwasher soap to keep on top of mould and mildew

Using soapy water and a cloth is a quick fix to keep on top of any dirt and mould that builds up as a result of excess moisture in the seal. You may avoid having to deep clean the seal later on by doing this.

• Avoid overusing bleach in the machine

Bleach when used in excess can damage the machine so it’s important to make sure that you are not overusing it when cleaning. Additionally, it can be challenging to completely empty the washer, and if you don’t empty it correctly, it could cause damage to your clothes.

• Make sure to clean your machine regularly

At least twice a year is recommended for machine cleaning, though more frequent cleanings may be advantageous. If you keep on top of your machine cleaning, you can prevent damage to your machine and keep it performing at optimal capacity.

• Use your laundry detergent to clean your machine

Using your regular laundry detergent on the longest cycle possible is one option if you don’t have any cleaning supplies on hand to clean your machine. Using biological detergent in particular can help keep your machine clean because the active enzymes in it work to break down any dirt or bacteria.

• See if you Washing Machine has a cleaning cycle setting

To keep your machine clean, you can enable the TubClean setting found on all of our LG washing machines.

• Use Sodium Percarbonate to get rid of any bad smells

Sodium percarbonate, also known as “laundry bleach” or “oxygen bleach,” is another method for reducing unpleasant odors in your machine. A benefit of sodium percarbonate is that it outperforms baking soda in strength while being safer to use than liquid bleach because it doesn’t carry as many risks as sodium hyperchlorite.

• White Vinegar or Washing Machine Tablets can eliminate limescale build up

Using these anti-limescale solutions can help protect your machine for longer and, as a result, protect your laundry from any resulting discoloration if you live in an area with hard water or you frequently notice a limescale buildup in your machine.

• Stop smells by regularly airing out your machine

You can stop your Washing Machine from producing bad smells by airing out the dispenser drawer and the drum. This assists in preventing the moisture buildup that leads to mould and mildew, which are frequently to blame for the unpleasant odors coming from your machine.

• Buy your cleaning products in bulk

To save on money and time, invest in your cleaning products in bulk. By doing so, you can get more for your money and have a cleaning supply that will last a long time.

FAQs

Summary: How to Clean LG Washing Machine?

Regular maintenance on your LG washing machine should include cleaning it. We have described the procedures needed to clean the machine’s top load and front load versions in this article. Regular cleanings will keep your washer functioning smoothly and effectively. The lifespan of your washer will also be extended.

If you have any questions, please leave a comment. My Prime Home tries to give you the best home improvement information. Don’t forget to share the post. Thank you for reading.

Read about

• How to Level a Washing Machine?
• Can You Put Vans in the Washing Machine?