Are the error codes on your Samsung dishwasher flashing more brightly than your holiday lights did? So, How to Reset Samsung Dishwasher?

Dishwasher resets are simple to perform. Disconnect it (or shut off the electricity at the circuit breaker), wait for the dishwasher’s electrical charge to dissipate (usually 1 to 5 minutes at most), and then plug it back in.

All that is necessary to reset is that.

What is Resetting a Dishwasher?

On the display of your Samsung dishwasher, strange symbols might occasionally appear. Those images are error codes that indicate a particular issue with your machine. To figure out what’s wrong, compare the code to the owner’s manual’s list of error codes. You typically need to reset the dishwasher after resolving the issue.

Then what exactly is resetting a dishwasher? In essence, a dishwasher’s settings are reset to a state that is very similar to that of the factory. It also clears out any remaining charge in the control board, which could be the reason washing and rinsing are delayed.

A dishwasher’s problems can often be solved by resetting it, but this is not a foolproof fix for all of them. For example, it won’t fix damaged parts, raise the water’s temperature, or improve the cleaning efficiency of the apparatus.

I encourage you to read on if you want to discover how to reset your Samsung dishwasher.

How to Reset Samsung Dishwasher?

Although it might seem like a straightforward issue, you might need to reset your Samsung dishwasher if it isn’t draining or is emitting an error code.

Resetting your dishwasher can clear up strange glitches that may occur after a power outage, but it’ll require more troubleshooting if it doesn’t restart the dishwasher.

Depending on the error message or problem you are encountering, resetting your dishwasher to factory defaults may not always be the best course of action if you are having a specific dishwasher problem.

This article discusses how to reset, when you should or shouldn’t, and what to do if a reset is ineffective.

Turning off the circuit breaker or unplugging the Samsung dishwasher will reset it. After waiting for two to five minutes, restart the process.

Steps for Resetting Samsung Dishwasher

Switching off the dishwasher’s power and using the built-in reset system are the two ways to reset a Samsung dishwasher, respectively. Let’s examine each technique separately.

Cutting Power to the Dishwasher

For freestanding dishwashers:

1. Dishwasher should be turned off.
2. Plug the power cord out.
3. Wait for five to ten minutes (you can also unplug the device at night).
4. Reconnect the power cable.
5. Start the dishwasher, then complete the test cycle.

For hardwired dishwashers:

1. Deactivate the dishwasher.
2. Find the breaker panel in your house.
3. The circuit leading to your dishwasher should be turned off.
4. Allow five to ten minutes.
5. Activate the circuit for the dishwasher.
6. Start the dishwasher, then run a test cycle.

Built-in Reset System

Certain Samsung models have this system available. To determine whether your Samsung dishwasher has a reset button, consult the owner’s manual. If it does, this is usually how to do it:

1. Dishwasher should be turned on.
2. When the lights on the control board begin to turn on, press and hold the Start/Reset button for 3 to 5 seconds.
3. Allow the dishwasher to finish its reset program for 30 to 60 minutes.
4. Restart the dishwasher after it shuts off and run a test cycle.

When Not to Do a Reset Samsung Dishwasher.

First look in the user manual for a solution if you see an error code. Error codes are likely to return soon, if not right away, if you reset your Samsung dishwasher before fixing the problem. For instance, the dishwasher doesn’t need to be reset for the reasons listed below.

1. Several factors could be at play if the dishwasher won’t start. A reset is not always the best option.
2. As previously mentioned, if your dishwasher won’t turn on at all, a wiring problem is likely to be the cause. Call a skilled installer for assistance if you think there might be a problem with your Samsung dishwasher installation.
3. If your dishwasher appears to be operating normally but the water is still not draining, you may be experiencing drain-related issues such as error codes 5C, 5E, OC, or OE. In this case, the issue may be caused by improper hose installation.

When to Do a Reset Samsung Dishwasher

Even after performing all necessary troubleshooting, your dishwasher may still have some error codes. In this scenario, the dishwasher would need to be reset. Suggested reading: How long do dishwashers last? This guide will tell you how to prolong the life of your dishwasher and keep it in good working condition.

Error Code Explanations

If an error code is showing on your dishwasher, here’s what these mean (taken from the common manual above):

Code	Action
OC	Over-level water check Functional check. Close the water supply valve and go to your house circuit breaker panel, set the dishwasher’s circuit breaker switch to off , and then contact an authorized Service center for Samsung.
LC	Leakage Check If a water supply valve connection leak occurs, close the water supply valve and go to your house circuit breaker panel, set the dishwasher’s circuit breaker switch to off , and then contact the installer to fi x. If the problem continues, contact an authorized Samsung service center
4C	Water Supply Check Check if the water supply valve is closed, the water supply is suspended, or the water inlet valve or line is frozen or clogged by foreign particles. If the problem continues, close the water supply valve, and then contact an authorized Samsung service center
5C	Drain Check After closing the water supply valve, check whether the drain hose is clogged or folded. Additionally, check to see if the sump’s drain hole is blocked. Contact a Samsung service center that has been authorized if the issue persists.
HC	High Temperature Heating Check The product ensure that the temperature for hot water line is not too high and adjusts to appropriate temperature (120 ˚F (49 C) to 149 C (65 C) automatically. If the problem continues, go to your house circuit breaker panel, set the dishwasher’s circuit breaker switch to off , and then contact an authorized Samsung service center.
3C	Pump Operation Check Dishwasher should be turned off, then restarted to perform a functional check. Contact an authorized Samsung service center if the issue persists.

In a few cases, fixing your dishwasher will require additional actions. Continue reading to learn more about how to reset your dishwasher and fix other problems.

Find Troubleshooting for Your Issue Instead of Just Resetting

The error codes stored in memory will be erased if you reset your dishwasher. You might think “Great, now my dishwasher will start working again,” but it’s a little more complicated.

First of all, the majority of error codes indicate a problem with your dishwasher that needs to be fixed. Resetting without first conducting the necessary investigation into the problem will probably lead to the code reappearing soon, if not right away. Here’s a few examples of common dishwasher issues where a reset alone won’t help, with links to guides for the full troubleshooting of that issue:

If the dishwasher doesn’t start, it could be because the door is not completely closing, and a reset won’t fix that.

If your dishwasher won’t turn on at all, especially if it’s recently installed, then it’s likely to be an issue with the installation. The installation should be reviewed in that situation, ideally with a qualified installer.

If you have a drain issue, often with error codes like 5C, 5E, If the problem is OC or OE, the drain hose’s installation is frequently to blame. In this case, a reset won’t work unless the drain hose is fixed first.

You can also see our error code guide for a list of what troubleshooting to do for each code, or our blinking lights article for models without a digital display. If you have a different issue, try searching for it from our support page to find a guide specific to the issue you’re having.

Therefore, when should you reset? when all troubleshooting has been completed. Resetting the dishwasher is the logical next step when an error code persists despite your best efforts to resolve it.

You must make a service request if a reset doesn’t remove the code and you’ve already tried all the troubleshooting techniques. At the conclusion of each of our troubleshooting manuals, there is a link for service requests.

Conclusion: How to Reset Samsung Dishwasher?

You may become alarmed if you see flashing lights or error messages on your dishwasher’s display. However, power outages or data backlogs can occasionally cause dishwasher malfunctions. Here, a straightforward reset can help to clean the system and restore proper operation.

I sincerely hope the reset procedure in this article has assisted you in getting your Samsung dishwasher up and running once more.

Read about

• Are Ninja Blenders Dishwasher Safe? 
• How to Reset a Whirlpool Dishwasher?
• How to Reset a Bosch Dishwasher?