What should you do, then, if your child unintentionally locks the door while trying to enter your bedroom? So, how to unlock a bedroom door without a key?

In general, you should use various tools, including knives, bobby pins, and credit cards. Besides, you can try to Remove the Hinges, Drill the Lock Away, Lubricate the Keyhole, and Pick The Lock.

For more information, keep reading.

How to Unlock a Bedroom Door Without a Key?

It can be a real hassle if you lock the door and forget to take your key with you. It becomes worse if you can’t open the door on your own and need a locksmith’s assistance. But you’d have to wait for several hours.

However, we’ll give you some tips today so you can quickly unlock your door.

Using Different Types of Equipment

To unlock your bedroom door, use other tools. Therefore, choose your tools wisely as this may not work for all types of locks.

Use a Credit Card on a Spring Lock

A spring lock in your bedroom is simple to open with a credit card.

For spring locks, a credit card will work even though deadbolts might not. The best tool for opening these locks is a laminated credit card.

Force the card between the lock and the frame. The card should be bent back by being pressed up against the frame.

This will help force the lock back into the door and open it.

Forcing the card between the door and the frame above the lock may be necessary if there isn’t room between the lock and the frame.

Swipe the card quickly downward while angling it toward the frame. For this use, you might need a card that is thicker and more durable.

Use Bobby Pins

To unlock keyholes, you’ll require two bobby pins bent in a specific direction. One pin should be bent so that it is parallel to the two free ends near the fulcrum. Put this part of the keyhole at the bottom. The first should be made into a long, straight piece. The pin’s second fulcrum section should be bent.

Slightly curve one end to create a pick. Place it as high as possible in the keyhole. Next, the door is locked or unlocked.

Use Thin Wire Or Rod

This method works on doors that have “privacy handles”, locked by a button pressed in the handle. Find the tiny hole on the doorknob. A paper clip can be hammered flat, or a tiny butter knife, thin wire, or rod can be inserted.

Push it as far as you can straight through, then twist it in different directions. Do this until it catches a groove to open the lock.

Use a Knife

Knives are an incredibly effective piece of equipment for unlocking a stuck or locked door. However, using a sharp knife might result in mishaps.

To prevent accidents, we advise using a butter knife or a spreader. They aren’t sharp but thick enough to tolerate the pressure implied on them.

Use a Small Screwdriver

On doors with privacy handles, a small screwdriver is useful. Pushing a button on the door handle locks these doors.

Look for a small hole on the doorknob if you find yourself locked out of the bedroom without the key.

Put as much of a small screwdriver as you can into this hole.

As you continue to turn and twist the screwdriver, the lock will eventually open.

Use a Hammer to Break the Lock

This is your last option. You’d usually be better off calling a locksmith or the non-emergency line at the nearby fire station. Smash the doorknob if you need to leave quickly. Alternately, lockdown repeatedly until it drifts away from the door.

Other than using a hammer, some prefer using clutches. You are free to make your selection.

Remove the Hinges

Between the bottom knuckle and the pin, wedge a flat-head screwdriver. A hammer should be used to tap the screwdriver’s handle downward. Remove the head and pin once they are sufficiently free.

But remember, not all the hinges work the same way, for example, for cabinet hinges.

Continue with the rest of the hinges not removing quickly or similarly. Using a Phillips head screwdriver, you might be able to force the pin out.

Drill the Lock Away

But what should one do if there is no other way to open a stuck lock? Drilling the lock or the area around it is one method of opening the door. You can use the m7 or m42 drill bits for this.

Drill over the keyhole to start the process. Next, lubricate the drill bits before beginning to drill.

Finally, use a screwdriver to pry open the lock’s internal cylinder. Put it inside the recently created hole. By using this method, the lock will be harmed. There won’t be any damage to the door.

If the door still won’t open, you should drill a hole around the lock. Drill a few strategic locations in the wood to loosen it, then push the door open. A stuck lock might be released by drilling a door. It might be necessary to buy a new door for this.

Lubricate the Keyhole

Instead of using oil, lubrication functions like graphite powder. After drying out, it will make the lock jam even more. The keyhole should work better if you give it a single, quick spray or squeeze. Use any oil you have or the tip of a graphite pencil to rub the key if you get locked out of a room.

However, we don’t recommend that you employ these strategies. It will be much simpler and require less effort to use a key. But, there’s a catch. In total there are 9 types of interior doors, so it might not work for all.

Pick the Lock

Compared to the first two methods of opening a door without a key above, picking a lock takes more time and skill. You need an Allen key in order to pick a door lock. Your keyhole’s bottom edge should receive the key’s shorter end.

Put a little more force on your lock. Spin it a little bit in the direction the key turns. For a while, apply consistent pressure. With an unbent paper clip, you can then begin to pick this lock.

You can pick a lock using one of two common methods. The pin-by-pin method comes first, followed by the scrubbing technique.

• The clip should be carefully inserted into the keyhole’s bottom if you opt for the latter option. Back up the clip and then raise it up. Don’t forget to apply more pressure to your Allen key as you repeat this procedure in a circular motion.
• After a while, you might notice your lock moving. Try the pin-by-pin option instead if the scrubbing strategy doesn’t work for you.
• When using the pin-by-pin method, gradually insert the clip while applying light pressure to the Allen key. Hold the curve of the paper clip as it touches the pin and raise it until you hear a clicking sound, which denotes that the pin has been moved into place. Repeat this with other pins until your lock opens.

Additionally, we advise you to try a different house key. Apply lubricant to your keyway if your chosen key manages to enter the door lock. Turn the key slowly, slide it in and out, and rake it back and forth.

Make sure not to prolong it throughout the process.

Suggested reading: So, does a bedroom have to have a closet? Below will tell you what makes a bedroom a bedroom. Surprise! The answer to this question is not that simple. In order to share our research with you here, we conducted a little investigation. Keep reading.

Frequently Asked Questions

These are the most typical queries regarding how to open a bedroom door without a key.

Summary: How to Unlock a Bedroom Door Without a Key

Daily life may present you with challenging circumstances, such as forgetting the bedroom key and unintentionally locking yourself out of this space. The most crucial thing is to maintain your composure and adhere to our detailed instructions.

What is your opinion on this article about how to unlock a bedroom door without a key? Comment below with your advice on how to unlock a locked bedroom door without a keyhole. Don’t be afraid to share this manual on social media with your loved ones.

I appreciate your reading.